9.1.2.1. Single Wall

With this command you can draw one or more walls along the reference line. Define wall corner points one by one.

• Define the starting corner point of your wall and then the end corner point.

• Define the endpoint of the next wall (the wall endpoint coincides with the starting point of the next wall), or

• Enterstart drawing a new wall, irrespective of the previous one.

• Entercompletes the command.

2Wall directions depend on the settings of the reference line buttons in the Properties dialog box; to modify press TAB when drawing. After pressing the TAB move the cursor to see the result.

The wall will be placed on the right side of the reference line.     The wall will be placed onto the axis.         The wall will be placed on the left side of the reference line.